Inputting Common Variables - Mitsubishi Electric EZMotion-NC E68 Series Operation Manual

6.1.5 Inputting Common Variables

Common variable data that has been output by common variable output operation can be input.
(Note) Common variable data input operation cannot be performed during automatic operation.
(1) Inputting common variable data
Set the data type to common
variable.
# ( 5 ) DATA (
Press the
INPUT
1) Read of the data is started.
The contents of input data and message
"DATA IN EXECUTION" are displayed.
2) When all data through the end has been input
and the tape end code % (EOR) is read, data
input ends with message "DATA IN
COMPLETE" displayed.
)
key.
# ( 5 ) DATA (
<INPUT DATA>
<COMP. DATA>
# ( 5 ) DATA (
<INPUT DATA>
%
<COMP. DATA>
# ( ) DATA (
I-224
6. Data In/Out
6.1 DATA INPUT
)
DATA IN EXECUTION
)
DATA IN COMPLETE
)