Table of Contents
Advertisement
6.3 PROGRAM ERASE
When the menu key
User-prepared work programs (main program and subprogram) can be erased in any desired
program number or group units on the PROGRAM ERASE screen.
#
Item
1
MAIN
PROGRAM
<A>
2
MAIN
PROGRAM
<B>
3
MAIN
PROGRAM
<C>
4
FIXED CYCLE Although this is specified to erase a fixed cycle program, normally it cannot be
is pressed, the PROGRAM ERASE screen is displayed.
ERASE
Explanation
This is specified to erase data in the
range of work program numbers 1 to
7999 and 10000 to 99999999.
This is specified to erase data in the
range of standard subprogram 8000
to 8999 mainly prepared by the user.
This is specified to erase data in the
range of custom programs 9000 to
9999 mainly provided by the machine
maker.
operated. To erase a fixed cycle program, set the parameter. Refer to the Appendix
"Registration and editing of fixed cycle programs". When NC is operated without
setting the parameter, SETTING ERROR occurs.
6.3 PROGRAM ERASE
[PROGRAM ERASE]
#1 MAIN PROGRAM
#2
#3
#4 FIXED CYCLE
# ( ) DATA (
INPUT
OUTPUT
Program
number
specification
1 to 7999 and
10000 to
99999999
8000 to 8999
9000 to 9999
I-242
6. Data In/Out
IN/OUT
A
1--
10000--99999999
B
8000--
C
9000--
)
ERASE
FILE
Data setting range
Program
program
group erase
ALL
ALL
ALL
3
7999
8999
9999
MENU
All
erase
CLR
Advertisement
Table of Contents
