Table of Contents
Advertisement
6.2.7 Outputting Auxiliary Axis Parameter Data
Auxiliary axis parameter data can be output.
(1) Auxiliary axis parameter data output operation
Set the data type to the auxiliary axis
parameter.
# ( 2 8 ) DATA (
Press the
key.
INPUT
1) Data output starts and the contents of the
output data and message "DATA OUT
EXECUTION" are displayed.
2) When tape end code % (EOR) is output, the
data output completes with message "DATA
OUT COMPLETE" displayed.
(Note) If MR-J2-CT is not connected, "E01 SETTING ERROR" will occur and output will not be carried
out.
)
I-239
6. Data In/Out
6.2 DATA OUTPUT
# ( 28 ) DATA (
)
<OUTPUT DATA>
DATA OUT EXECUTION
# ( 28 ) DATA (
)
<OUTPUT DATA>
%
DATA OUT COMPLETE
# (
) DATA (
)
Advertisement
Table of Contents
