Table of Contents
Advertisement
(3) To erase all machining programs registered in memory
To erase all of machining programs 1~99999999 registered in memory, perform the following:
Set "CLR" in DATA (
# (
)
DATA ( C L R )
1) No value needs to be entered in #
(
).
Press the
key.
INPUT
1) All machining program erase is
executed and terminated almost in a
moment. The message "ERASE
COMPLETE" is displayed in the
message field and the data setting
area becomes blank.
Check the PROGRAM FILE screen.
1) "PROGRAM ENTRY" is set to 0 and "REMAIN" is
set to the maximum number of programs defined in
the specifications.
2) "CHARACTER" is set to 0 and "REMAIN" is set to
the maximum number of stored characters defined
in the specifications.
The number of programs and the number of
characters are as listed below according to the
specifications:
Tape storage
Number of
length
programs
160m
200
600m
400
3) The PROGRAM FILE screen becomes blank,
indicating that no programs are registered.
).
Number of
Remarks
characters
64000
E60 Ver.A only
236250
I-245
6. Data In/Out
6.3 PROGRAM ERASE
# (
) DATA (
CLR )
ERASE EXECUTION
# (
) DATA (
CLR )
ERASE COMPLETE
# (
) DATA (
)
PROGRAM ENTRY
0
CHARACTER
0
<PROGRAM>
<CHR> <ST> <COMMENT>
REMAIN
200
REMAIN
64000
Advertisement
Table of Contents
