Mitsubishi Electric EZMotion-NC E68 Series Operation Manual page 504

(3) Data input/output related
Message
DATA IN EXECUTION
DATA WRITING IN PROGRESS • Data has been entered normally and the input data is being written to
DATA IN COMPLETE
COMPARE EXECUTION
COMPARE COMPLETE
DATA OUT EXECUTION
DATA OUT COMPLETE
ERASE EXECUTION
ERASE COMPLETE
COPY EXECUTION
COPY COMPLETE
CONDENSE EXECUTION
CONDENSE COMPLETE
MERGE EXECUTION
MERGE COMPLETE
No. CHANGE EXECUTION
No. CHANGE COMPLETE
(4) S-analog output adjustment related
Message
ADJUST EXECUTION
ADJUST COMPLETE
Appendix 6. Operation Messages on Setting and Display Unit
• Data is being read without error from the paper tape.
the ROM.
• Data has been stored without error.
• Comparison is being executed without error.
• Comparison has completed without error.
• Data is being output without error.
• Data has been output without error.
• Data is being erased without error.
• Data has been erased without error.
• The machining program is being copied without error.
• The machining program has been copied without error.
• The machining program is being condensed without error.
• The machining program has been condensed without error.
• The machining program is being merged without error.
• The machining program has been merged without error.
• The machining program No. is being changed without error.
• The machining program No. has been changed without error.
• Analog output adjustment is being executed without error.
• Analog output adjustment has completed without error.
IV-32
Message details
Message details