Mitsubishi Electric EZMotion-NC E68 Series Operation Manual page 168

# Item
8205 OT-CHECK-P
8206 TOOL CHG. P
8207 G76/87 IGNR
(For M system only)
8208 G76/87 (–)
(For M system only)
8209 G60 SHIFT
(For M system only)
8210 OT INSIDE
8211 MIRR. IMAGE
Contents
This sets the coordinates or the upper limit
coordinates of the prohibited range of stored stroke
limit IIB of the (+) direction in the moveable range of
the stored stroke limit II.
Set the coordinates of the tool change position for
G30. n (tool change position return).
Set with coordinates in the basic machine coordinate
system.
Select the shift operation at G76 (fine boring) and
G87 (back boring).
Specifies the shift direction at G76 and G87.
Set the last positioning direction and distance for a
G60 (uni-directional positioning) command.
The stored stoke limit function to be set in #8204 and
#8205 prevents the machine from moving to the
inside or outside of the specified range.
0: Inhibits outside area
(select stored stroke limit II.)
1: Inhibits inside area
(select stored stroke limit II B.)
Enable or disable the parameter mirror image
function.
0: Disable
1: Enable
I-153
4. Parameters (User)
4.2 Machining Parameters
Setup range (unit)
±99999.999 (mm)
±99999.999 (mm)
0: Shift effective
1: No shift
0: Shift to (+)
direction
1: Shift to (–)
direction
±99999.999 (mm)
0/1
0/1