Barrier Data - Mitsubishi Electric EZMotion-NC E68 Series Operation Manual

4.2.4 Barrier Data

[BARRIER]
#
8300 P0 X 0.000
8301 P1 X 0.000
8302 P2 X 0.000
8303 P3 X 0.000
8304 P4 X 0.000
8305 P5 X 0.000
8306 P6 X 0.000
# ( ) X( )
WORK PROCESS
# Item
8300 PO
(For L system only)
8301 P1
8302 P2
8303 P3
8304 P4
8305 P5
8306 P6
(For L system only)
8310 Barrier ON
(For L system only)
8311 P7
8312 P8
(For L system only)
8313 P9
8314 P10
(For L system only)
8315 BARRIER TYPE (L)
(For L system only)
8316 BARRIER TYPE (R)
(For L system only)
8310
Z 0.000 8311
Z 0.000 8312
Z 0.000 8313
Z 0.000 8314
Z 0.000 8315
Z 0.000 8316
8317
8318
8319
Z( )
I/O PAR
Set the basic X-coordinates of the chuck and the tail
stock barrier.
Set the center coordinate (Radius value) of
workpiece by the basic machine coordinate system.
Set the area of the chuck and tail stock barrier.
(Radius value)
Set the coordinate value from the center of
workpiece for X-axis. Set the coordinate value by
basic machine coordinate system for Z-axis.
Select the validity of the chuck and tailstock barrier.
0: Invalid
1: Valid
Set the area of the left spindle section.
• X axis: Set the coordinate value from the
workpiece center (P0). (Radius value)
• Z axis: Set the coordinates in the basic machine
coordinate system.
Set the area of the right spindle section.
• X axis: Set the coordinate value from the
workpiece center (P0). (Radius value)
• Z axis: Set the coordinates in the basic machine
coordinate system.
Set the shape of the left chuck and tailstock barrier.
0: No area
1: Chuck
2: Tailstock
Set the shape of the right chuck and tailstock barrier.
0: No area
1: Chuck
2: Tailstock
4.2 Machining Parameters
BARRIER ON
P7 X 0.000
P8 X 0.000 Z
P9 X 0.000
P10 X 0.000 Z
BARRIER TYPE (L)
BARRIER TYPE (R)
DELIV. AX. NAME
STOCK ANGLE (L)
STOCK ANGLE (R)
SETUP
Contents
I-154
4. Parameters (User)
PARAM 1.7/8
0
0.000
0.000
0
0
B
0
0
MENU
Setup range (unit)
±99999.999 (mm)
±99999.999 (mm)
0/1
±99999.999 (mm)
±99999.999 (mm)
0/1/2
0/1/2