Corona-Star For Angle Adapter; Assembling The Corona-Star - WAGNER PEA-C4XL-S Translation Of The Original Operating Manual

VERSION 03/2014
OPERATING MANUAL
8.8

CORONA-STAR FOR ANGLE ADAPTER

8.8.1

ASSEMBLING THE CORONA-STAR

Danger from electric current!
Risk of injury and damage to the device.
2
P_02334
ORDER NUMBER DOC2345334
WARNING
Only trained personnel may modify the Corona-Star.
Prior to assembling the Corona-Star, the high-voltage and the
powder feed must be switched off and secured against being
inadvertently switched on.
1
3
Procedure:
1. Switch off the high-voltage and the powder
feed and secure
inadvertently switched on.
2. Detach the Corona-Star 1 from spray gun
housing.
3. Fit Corona Star for angle adapter 2 on angle
adapter (direction of fi tting shown is only an
example).
4. Fasten the connection cable 3 on the spray
gun housing.
Note:
Check whether the grounding is assured.
5. The spray gun is ready for use again.
Note:
When converting the gun in the normal version, fi t
again without a Mini Corona-Star 1 angle adapter.
PEA-C4XL-S
them against being
51