Mounting The Corona-Star - WAGNER PEM-X1 Original Operating Manual

VERSION 09/2012
OPERATING MANUAL
8.9

MOUNTING THE CORONA-STAR

The Corona-Star is a retrofi t set for the spray gun, which helps to achieve a better surface
quality (e.g. reduction of "orange peel").
Danger from electric current!
Risk of injury and damage to the equipment.
2
±90°
P_01703
ORDER NUMBER DOC 2326020
WARNING
Only trained personnel may modify the Corona-Star.
Prior to mounting the Corona-Star, the high-voltage and
powder feed must be switched off and secured against being
inadvertently switched on.
1
B
Procedure:
1. Guide plug-in contact 1 of Corona-Star into hole B
on hook.
2. Attach clip 2 of Corona-Star to housing.
Flexible positioning in a range of ± 90° is possible.
PEM-X1
46