Processible Working Materials; Reasonably Foreseeable Misuse; Residual Risks - WAGNER PEA-C4XL-S Translation Of The Original Operating Manual

VERSION 03/2014
OPERATING MANUAL
2.5

PROCESSIBLE WORKING MATERIALS

Types of powder which can be charged electrostatically
Metallic powder
2.6

REASONABLY FORESEEABLE MISUSE

The following is prohibited:
coating work pieces which are not grounded,
unauthorized conversions and modifi cations to the spray gun,
processing liquid or similar coating products,
and using defective components, spare parts or accessories other than those
described in Chapter 12 of this operating manual.
The forms of misuse listed below may result in health issues and/or material damage:
use of damp powder paint,
incorrectly set values for powder discharge,
and incorrectly set electrostatic values.
2.7

RESIDUAL RISKS

Residual risks are risks which cannot be excluded even in the event of correct use.
If necessary, warning and prohibition signs at the relevant points of risk indicate residual
risks.
Residual risk Source
Skin contact with Handling powder
powder lacquers lacquers and
and cleaning agents cleaning agents
Powder lacquer Lacquering outside
in air outside the the defi ned working
defi ned working area
area
Falling down of Loosening of the
spray guns securing nuts
Residual voltage on Defi cient grounding Electrical shock
live parts
ORDER NUMBER DOC2345334
Consequences
Skin irritations,
Allergies
Inhalation of
substances
hazardous to health
Injuries
PEA-C4XL-S
Specifi c measures
Wear protective
clothing,
Observe safety data
sheets
Observe work and
operation instructions
Regular check of
fastenings
Indication of danger,
Instruction by trainer
Lifecycle phase
Operation,
Maintenance,
Disassembly
Operation,
Maintenance
Operation,
Maintenance
Operation,
Maintenance
9