Cleaning The Gun And Dismantling The Flat Spray Nozzle - WAGNER PEA-C4XL-S Translation Of The Original Operating Manual

VERSION 03/2014
OPERATING MANUAL
8.3

CLEANING THE GUN AND DISMANTLING THE FLAT SPRAY NOZZLE

3
2
1
P_00591
P_00592
P_00593
In the next section it is described how the protective wedge is to be dismantled and
inserted.
ORDER NUMBER DOC2345334
Procedure:
1. Unscrew union nut 1 from gun housing 5.
2. Pull fl at spray nozzle 2 off electrode holder 3.
3. Carefully remove electrode holder 3 from gun housing 5.
Note:
Do not damage the electrode holder, when pulling it out and
inserting it.
4. Remove powder residues from the parts removed and from
the spray gun.
5
Note:
Never place the spray gun or parts of the spray gun in cleaning
agent.
As a rule the protective wedge needs to be checked for wear and
replaced if necessary.
New protective wedge
Worn protective wedge
It is recommended to replace the protective wedge.
PEA-C4XL-S
42