VERSION 03/2014
OPERATING MANUAL
7.7.1
IMPULSE FLUSHING
Powder supply hose coupling may be hurled around!
Risk of injury and damage to the device.
If the gun is supplied with coating powder from a powder center, you can initiate an
impulse fl ushing from there. Further details are contained in the powder center's operating
manual.
Note:
During a paint change, the nozzle system does not necessarily have to disassembled.
ORDER NUMBER DOC2345334
WARNING
Check whether the hose is correctly attached to the hose
coupling.
Completely lock the hose coupling and secure it with an O-ring.
PEA-C4XL-S
34