Maintenance Procedures - WAGNER PEA-C4XL-S Translation Of The Original Operating Manual

Automatic powder spray gun
Table of Contents

Advertisement

VERSION 03/2014
OPERATING MANUAL
Incorrect maintenance!
Risk of injury and damage to the device.
8.2.3

MAINTENANCE PROCEDURES

The maintenance intervals should be adapted by the operator depending on the level of
use and if necessary the level of soiling.
If in doubt, we recommend contacting J. Wagner AG's specialist personnel.
The valid health and safety specifi cations and safety instructions provided in Chapter 4
must be adhered to for all maintenance work.
ORDER NUMBER DOC2345334
WARNING
If contact with powder products or cleaning agents causes skin
irritation, appropriate precautionary measures must be taken,
e.g. wearing protective clothing.
The footwear worn by operating staff must comply with
EN ISO 20344. The measured insulation resistance must not
exceed 100 MΩ.
The protective clothing, including gloves, must comply with
EN  ISO 1149-5. The measured insulation resistance must not
exceed 100 MΩ.
PEA-C4XL-S
39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents