Preparing The Spray Gun; Selection Of The Suitable Nozzle System - WAGNER PEA-C4XL-S Translation Of The Original Operating Manual

VERSION 03/2014
OPERATING MANUAL
6.4

PREPARING THE SPRAY GUN

6.4.1

SELECTION OF THE SUITABLE NOZZLE SYSTEM

The process of changing from the fan spray nozzle to a round spray nozzle with a defl ector
cone is described in Chapter 8.5 "Fitting a Round Spray Nozzle".
You will fi nd the article numbers of the diff erent nozzles in Chapter 12 "Accessories".
Nozzle Application overview
Flat jet nozzle Diffi cult work pieces
P_00694
Defl ector cone
P_00935
Nozzle Application
F1¹ Universal application (slow
powder cloud)
P_00694
F2¹ Targeted application (dense
powder cloud)
P_00694
F3¹ for small total air volume and
small jet width
(fastest powder cloud)
P_00694
F4¹ Wide fl at spray nozzle for high
powder application (slow
powder cloud)
P_00694
ORDER NUMBER DOC2345334
Undercuts
Profi les
Flat work pieces (reduced
picture frame)
Wire goods
Grid designs
deep and complex part
geometries
extensive work pieces
high penetration
Wide coating range
high penetration capability
for profi le parts
high stability
good atomization
specially for extensive work
pieces
Powder cloud
Widely spread fl at powder cloud
Oval powder cloud:
Size of the powder cloud is
dependent on the defl ector plate
diameter
Distance to Powder
work piece discharge
(mm) (g/min)
120 ... 300 50 ... 250
120 ... 400 30 ... 200
120 ... 300 ≤ 180
> 200
150 ... 400
(Total air >
4.5 Nm³/h)
PEA-C4XL-S
22