2.4
Corona-Star
The Corona-Star is a retrofit kit for the manual powder spraygun which helps to achieve a
better surface quality. The formation of the orange peel effect can be reduced or eliminated for
most powder types.
The assembling of the Corona-Star may only be carried out by trained
personnel!
Caution
Proceed as follows:
•
Switch off the powder coating system and secure it against being switched on again
unintentionally.
•
Connect the cable with the knurled screw B at the cover piece C.
•
Attach the Corona-Star D to the gun housing E.
•
Connect the gun cable A and the adapter cable F.
•
Connect the adapter cable F at the control unit.
Ensure proper grounding of the gun fixture!
Caution
The system is now ready for operation again.
02/01
PEM-C2
D
E
B
A
Connect gun cable A and
adapter cable F
11
Connect adapter
cable F at the
control unit
C
F
0351801