Safety Instructions For Staff; Safe Handling Of Wagner Powder Spray Devices; Grounding The Device; Accessories And Spare Parts - WAGNER PEA-C4XL-S Translation Of The Original Operating Manual

VERSION 03/2014
OPERATING MANUAL
4.2

SAFETY INSTRUCTIONS FOR STAFF

Always follow the information in this manual, particularly the general safety instructions
and the warning instructions.
Always follow local regulations concerning occupational safety and accident
prevention.
Under no circumstances may people with pacemakers enter the area where the high-
voltage fi eld between the spray gun and the work piece to be coated builds up!
4.2.1

SAFE HANDLING OF WAGNER POWDER SPRAY DEVICES

Do not point spray guns at people.
Before all work on the device, in the event of work interruptions and functional faults:
- Switch off the energy/compressed air supply.
- Secure the spray gun against actuation.
- Relieve pressure on spray guns and device.
- In case of functional faults: Identify and correct the problem, proceed as described
in the "Fault Rectifi cation" chapter.
4.2.2

GROUNDING THE DEVICE

The electrostatic charge may, in certain cases, give rise to electrostatic charges on the
device. This may result in the formation of sparks or fl ames when discharging.
Ensure that the device is grounded before each coating process.
Ground the work pieces to be coated.
Ensure that all persons inside the working area are grounded, e.g. by wearing
electrostatically conductive shoes.
The functionality of grounding cables must be checked regularly (see EN 60204).
4.2.3

ACCESSORIES AND SPARE PARTS

Only use an original Wagner powder hose.
ORDER NUMBER DOC2345334
PEA-C4XL-S
13