Assembling The Angle Adapter; Removing The Nozzle And Electrode Holder - WAGNER PEA-C4XL-S Translation Of The Original Operating Manual

VERSION 03/2014
OPERATING MANUAL
8.6

ASSEMBLING THE ANGLE ADAPTER

8.6.1

REMOVING THE NOZZLE AND ELECTRODE HOLDER

The standard Corona spray gun is delivered with a fl at spray nozzle. The nozzle can be
changed easily, as described below.
Note:
If changing from the fl at spray nozzle to the round spray nozzle with defl ector cone,
the depth control must be adjusted.
A WA90 C4, WA 60 C4 or WA30 C4 angle adapter is necessary to perform the change,
as listed in Chapter 12 "Accessories".
Note:
A fl at spray nozzle as well as a round spray nozzle can be fi tted to the angle adapter.
2
1
P_00591
ORDER NUMBER DOC2345334
3
5
Procedure:
1. Unscrew union nut 1 from gun housing 5.
2. Pull fl at spray nozzle 2 off electrode holder 3.
3. Carefully remove electrode holder 3 from gun
housing 5.
Note:
Do not damage the electrode holder, when pulling it
out and inserting it.
4. Remove powder residues from the parts
removed and from the spray gun.
PEA-C4XL-S
47