HEIDENHAIN TNC 620 User Manual page 600

18
Tables and overviews
18.5 Functions of the TNC 620 and the iTNC 530 compared
Function
Datum table:
Sorting function by values
within an axis
Resetting the table
Hiding axes that are not
present
Switching the list/form view
Inserting individual line
Transfer of actual position
values in individual axis to the
datum table per keystroke
Transfer of actual position
values in all active axes to the
datum table per keystroke
Using a key to capture the last
positions measured by TS
FK free contour programming:
Programming of parallel axes
Automatic correction of relative
references
600
TNC 620
Available
Available
Available
Switchover via split-screen key
Allowed everywhere,
renumbering possible after
request. Empty line is inserted,
must be filled with zeros
manually
Not available
Not available
Not available
With X/Y coordinates,
independent of machine type;
switchover with FUNCTION
PARAXMODE
Relative references in contour
subprograms are not corrected
automatically
iTNC 530
Not available
Not available
Available
Switchover by toggle soft key
Only allowed at end of table.
Line with value 0 in all columns
is inserted
Available
Available
Available
Machine-dependent with the
existing parallel axes
All relative references are
corrected automatically
TNC 620 | User's Manual
HEIDENHAIN Conversational Programming | 3/2014