Graphic Settings - HEIDENHAIN TNC 620 User Manual

17
MOD functions
17.2

Graphic settings

17.2 Graphic settings
With the MOD function Graphic settings, you can select the model
type and model quality.
Select the graphic settings:
In the MOD menu, select the Graphic settings group
Select the model type
Select the model quality
Press the Apply soft key
Press the OK soft key
You have the following simulation parameters for the graphic settings:
Model type
Choice
3-D
2.5 D
No model
Model quality
Choice
Very high
High
Medium
Low
532
Properties
Very true to detail,
heavy time and processor
consumption
Fast
Very fast
Properties
High data transfer rate, exact depiction of tool geometry,
depiction of block end points and block numbers possible
High data transfer rate, exact depiction of tool geometry
Medium data transfer rate, approximation of tool geometry
Low data transfer rate, coarse approximation of tool geometry
Application
Milling with undercuts,
milling-turning operations
Milling without undercuts,
Line graphics
HEIDENHAIN Conversational Programming | 3/2014
Displayed
symbol
Displayed
symbol
TNC 620 | User's Manual