18
Tables and overviews
18.3 Technical Information
User functions
Programming graphics
Program Run graphics
Display modes
Machining time
Returning to the contour
Datum tables
Touch probe cycles
574
■
In the Programming mode, the contour of the NC blocks is drawn on
screen while they are being entered (2-D pencil-trace graphics), even
while another program is running
x
Graphic simulation of real-time machining in plan view / projection in 3
planes / 3-D view
■
Calculating the machining time in the Test Run mode of operation
■
Display of the current machining time in the Program Run operating
modes
■
Mid-program startup in any block in the program, returning the tool to
the calculated nominal position to continue machining
■
Program interruption, contour departure and return
■
Multiple datum tables, for storing workpiece-related datums
Calibrate the touch probe
x
Compensation of workpiece misalignment, manual or automatic
x
Datum setting, manual or automatic
x
x
Tools can be measured automatically
x
Automatically measuring workpieces
TNC 620 | User's Manual
HEIDENHAIN Conversational Programming | 3/2014