14
Manual operation and setup
14.4 Functional safety FS (option)
Additional status displays
On a control with functional safety FS, the general status display
contains additional information about the current status of safety
functions. The TNC shows this information as operating statuses of
the status displays T, S and F
Status display
STO
SLS
SOS
STO
The TNC shows the active safety-related mode of operation with an
icon in the header to the right of the operating mode text:
Button
456
Brief description
Energy supply to the spindle or a feed
drive is interrupted.
Safely-limited speed: A safely limited
speed is active.
Safe operating stop: Safe operating stop is
active.
Safe torque off: Energy supply to the
motor is interrupted.
Safety-related operating mode
SOM_1 operating mode active
SOM_2 mode active
SOM_3 mode active
SOM_4 mode active
TNC 620 | User's Manual
HEIDENHAIN Conversational Programming | 3/2014