Comparison: Differences In Test Run, Functionality; Comparison: Differences In Test Run, Operation; Comparison: Differences In Manual Operation, Functionality - HEIDENHAIN TNC 620 User Manual
Hide thumbs
Also See for TNC 620:
- User manual (598 pages) ,
- Operating instructions manual (64 pages) ,
- User manual (571 pages)
Table of Contents
Advertisement
Functions of the TNC 620 and the iTNC 530 compared 18.5
Comparison: Differences in Test Run, functionality
Function
Test Run up to block N
Calculation of machining time
Comparison: Differences in Test Run, operation
Function
Arrangement of soft-key rows and
soft keys within the rows
Zoom function
Machine-specific miscellaneous
functions M
Displaying/editing the tool table
3-D view Displays a transparent
workpiece
3-D view Displays a transparent
tool
3-D view Displays tool paths
Adjustable model quality
Comparison: Differences in Manual Operation,
functionality
Function
Jog increment function
Preset table
TNC 620 | User's Manual
HEIDENHAIN Conversational Programming | 3/2014
TNC 620
Function not available
Each time the simulation is
repeated by pressing the START
soft key, the machining time is
totaled
TNC 620
Arrangement of soft-key rows and soft-keys varies depending on the
active screen layout.
Each sectional plane can be
selected by individual soft keys
Lead to error messages if they
are not integrated in the PLC
Function available via soft key
Available
Available
Available
Available
TNC 620
The jog increment can be defined
separately for linear and rotary
axes
Basic transformation (translation
and rotation) of machine table
system to workpiece system via
the columns X, Y and Z, as well as
spatial angles SPA, SPB and SPC.
In addition, the columns X_OFFS
to W_OFFS can be used to define
the axis offset of each individual
axis. The function of the axis
offsets can be configured.
iTNC 530
Function available
Each time the simulation is
repeated by pressing the START
soft key, time calculation starts at
0
iTNC 530
Sectional plane can be selected
via three toggle soft keys
Are ignored during Test Run
Function not available
Function not available
Function not available
Function not available
Function not available
iTNC 530
The jog increment applies for both
linear and rotary axes
Basic transformation (translation )
of machine table system to
workpiece system via the
columns X, Y and Z, as well as a
ROT basic rotation in the working
plane (rotation).
In addition, the columns A to W
can be used to define datums in
the rotary and parallel axes.
18
603
Advertisement
Table of Contents
