HEIDENHAIN TNC 620 User Manual page 247

Save the selected contour elements to the
clipboard of the TNC so that you can then insert
the contour in a plain-language program, or
To save the selected contour elements in a plain-
language program, enter any file name and the
target directory in the pop-up window displayed
by the TNC. Default setting: Name of the DXF
file. If the name of the DXF file contains special
characters or spaces, the TNC replaces the
characters with underscores. Alternately, you can
also press the OK button: Plain language program
(.H) or contour description (.HC)
Confirm the entry: The TNC saves the contour
program to the selected directory
If you want to select more contours, press the
Cancel Selected Elements soft key and select the
next contour as described above.
The TNC also transfers two workpiece-blank
definitions () to the contour program. The first
definition contains the dimensions of the entire
DXF file. The second one, which is the active one,
contains only the selected contour elements, so that
an optimized size of the workpiece blank results.
The TNC only saves elements that have actually been
selected (blue elements), which means that they
have been given a check mark in the left window.
When you save a file you can first add a bookmark
for the file location Later you can select the
bookmark if you want to save more files in the same
directory. If you want to add a bookmark or select
one, click the path information next to the symbol in
the saving dialog box
. The TNC opens a menu in which you can manage
the bookmarks.
TNC 620 | User's Manual
HEIDENHAIN Conversational Programming | 3/2014
Processing DXF Files (Software Option)
7
7.1
247