Input format and unit of TNC functions
Positions, coordinates, circle radii, chamfer
lengths
Tool numbers
Tool names
Delta values for tool compensation
Spindle speeds
Feed rates
Dwell time in Cycle 9
Thread pitch in various cycles
Angle of spindle orientation
Angle for polar coordinates, rotation, tilting
the working plane
Polar coordinate angle for helical
interpolation (CP)
Datum numbers in Cycle 7
Scaling factor in Cycles 11 and 26
Miscellaneous functions M
Q parameter numbers
Q parameter values
Surface-normal vectors N and T with 3-D
compensation
Labels (LBL) for program jumps
Labels (LBL) for program jumps
Number of program section repeats REP
Error number with Q parameter function
FN14
TNC 620 | User's Manual
HEIDENHAIN Conversational Programming | 3/2014
Technical Information 18.3
-99 999.9999 to +99 999.9999
(5, 4: places before the decimal point, places after the
decimal point) [mm]
0 to 32 767 .9 (5, 1)
16 characters, enclosed by quotation marks with
CALL. Permitted special characters: #, $, %, &, -
–99.9999 to +99.9999 (2, 4) [mm]
0 to 99 999.999 (5, 3) [rpm]
0 to 99 999.999 (5.3) [mm/min] or [mm/tooth] or [mm/rev]
0 to 3600.000 (4, 3) [s]
–99.9999 to +99.9999 (2, 4) [mm]
0 to 360.0000 (3, 4) [°]
–360.0000 to 360.0000 (3, 4) [°]
-5 400.0000 to 5 400.0000 (4, 4) [°]
0 to 2999 (4, 0)
0.000001 to 99.999999 (2, 6)
0 to 999 (4, 0)
0 to 1999 (4, 0)
–99 999.9999 to +99 999.9999 (9, 6)
–9.99999999 to +9.99999999 (1, 8)
0 to 999 (5, 0)
Any text string in quotes ("")
1 to 65 534 (5, 0)
0 to 1199 (4, 0)
18
TOOL
579