HEIDENHAIN TNC 620 User Manual page 190

6
Programming: Programming contours
6.2 Fundamentals of Path Functions
Radius compensation
The radius compensation must be in the block in which you
move to the first contour element. You cannot activate radius
compensation in a circle block. It must be activated beforehand in
a straight-line block (See "Path contours - Cartesian coordinates",
page 200) or approach block (APPR block, See " Approaching and
departing a contour", page 192).
Pre-position
Danger of collision!
Before running a part program, always pre-position
the tool to prevent the possibility of damaging it or
the workpiece.
Creating the program blocks with the path function keys
The gray path function keys initiate the plain-language dialog. The
TNC asks you successively for all the necessary information and
inserts the program block into the part program.
190
TNC 620 | User's Manual
HEIDENHAIN Conversational Programming | 3/2014