HEIDENHAIN TNC 620 User Manual page 546

17
MOD functions
17.11 Ethernet interface
General network settings
Press the DEFINE NET soft key to enter the general network
settings. The Computer name tab is active:
Setting
Primary
interface
Computer
name
Host file
Select the Interfaces tab to enter the interface settings:
Setting
Interface list
Allow IP
forwarding
546
Meaning
Name of the Ethernet interface to be
integrated in your company network.
Only active if a second, optional Ethernet
interface is available on the control hardware
Name displayed for the TNC in your
company network
Only required for special
Name of a file in which the assignments of
IP addresses to computer names is defined
Meaning
List of the active Ethernet interfaces. Select
one of the listed interfaces (via mouse or
arrow keys)
Activate button: Activate the selected
interface (an X appears in the Active
column)
Deactivate button: Deactivate the
selected interface (- in the Active column)
Configuration button: Open the
configuration menu
This function must be kept
Only activate this function if external access
via the second, optional Ethernet interface
of the TNC is necessary for diagnostic
purposes. Only do so after instruction by our
Service Department
applications:
deactivated.
HEIDENHAIN Conversational Programming | 3/2014
TNC 620 | User's Manual