HEIDENHAIN TNC 620 User Manual page 254

7
Programming: Data transfer from DXF files or plain-language contours
7.1 Processing DXF Files (Software Option)
Element information
At the bottom left of the screen, the TNC displays the coordinates
of the machining position that you last selected via mouse click in
the left or right window
Undoing actions
You can undo the four most recent actions that you have taken in
the mode for selecting machining positions. The following icons are
available:
Function
Undo the most recently conducted action
Repeat the most recently conducted action
Mouse functions
Use the mouse for magnifying and reducing as follows:
Define the zoom area by dragging the mouse with the left
button depressed
If you have a wheel mouse, you can use it to zoom in and out.
The zooming center is the location of the mouse pointer
Click the magnifying glass icon or double-click with the right
mouse button to reset the view to the default setting
You can move the current view by pressing and holding the center
mouse button.
If 3-D mode is active, you can rotate and tilt the view by pressing
and holding the right mouse button.
Deselecting selected positions:
To deselect two or more selected positions, press and hold the
Ctrl key and open an box with the left mouse key
To deselect individual positions, press and hold the Ctrl key and
click them individually
254
Button
HEIDENHAIN Conversational Programming | 3/2014
TNC 620 | User's Manual