HEIDENHAIN TNC 620 User Manual page 560

18
Tables and overviews
18.1 Machine-specific user parameters
Parameter list
Parameter settings
DisplaySettings
Settings for screen display
Sequence of displayed axes
[0] to [5]
Type of position display in the position window
Type of position display in the status display
Definition of decimal separator for position display
Feed rate display in Manual Operation operating mode
Display of spindle position in the position display
Display or hide the PRESET TABLE soft key.
560
Depends on the available axes
NOML.
ACTL
REF ACTL
REF NOML
LAG
DIST
NOML.
ACTL
REF ACTL
REF NOML
LAG
DIST
.
At axis key: Display the feed rate only if an axis direction button is pressed
Always minimum: Always display the algebraic sign
During closed loop: Display spindle position only if spindle is in position control loop
During closed loop and M5: Display of spindle position if spindle is servo controlled
and M5 is active
True: Preset table soft key is not displayed
False: Preset Table soft key is displayed
TNC 620 | User's Manual
HEIDENHAIN Conversational Programming | 3/2014