YASKAWA PROFINET V1000 Technical Manual page 50

9 Web Interface
Network Monitor
Msg Tx OK
Msg Rx OK
Current Connections
Msg Tx Dropped
Msg Rx Dropped
Collisions
Msg Tx Errors
Msg Rx Errors
Tx Retry
Note: Cumulative counters are reset when the power supply is cycled.

Doc Links Tab
The Doc links tab contains links to the option documentation on the Yaskawa website.
Figure 38
50
Table 32 Network Monitor Descriptions
Cumulative number of messages transmit successfully from SI-EP3/V.
Cumulative number of messages received successfully to SI-EP3/V.
Current number of open connections.
Cumulative number of messages dropped due to output network buffer being full and unable to hold the
new message.
Cumulative number of messages dropped due to input network buffer being full and unable to hold the
new message.
Cumulative number of collisions (half duplex only) reported by the MAC/PHY (Media Access Control/
Physical Layer).
Cumulative number of transmit errors reported by the MAC/PHY (Media Access Control/Physical Layer).
Cumulative number of receive errors reported by the MAC/PHY (Media Access Control/Physical Layer).
Cumulative number of retransmits due to busy medium reported by the MAC/PHY (Media Access
Control/Physical Layer).
SI-EP3
Figure 39 Doc Links Tab View
YASKAWA ELECTRIC SIEP C730600 70B V1000 Option SI-EP3/V Technical Manual
Explanation