YASKAWA PROFINET V1000 Technical Manual page 16

5 Installation Procedure
Ground Wire Length
mm (in)
150 (5.9)
200 (7.9)
250 (9.8)
400 (15.7)
5.
For IP20/Open-Chassis models, go to Step
6.
For IP20/UL Type 1 enclosure models CIMR-VAF, loosen the screw on the front of the terminal
cover and remove it from the drive. Refer to
Refer to Figure 10
4A0038F, which require removing the plastic terminal cover prior to removing the terminal cover.
Note: Installing the option on an IP20/UL Type 1 enclosure drive voids UL Type 1 protection while maintaining IP20 conformity.
Figure 9
Figure 10
V1000
(Models CIMR-VBA0006F to BA0018F; 2A0008F to 2A0069F; 4A0001F to 4A0038F)
16
Table 7 Ground Wire Selection
Single-Phase
200 V Class
BA0001
BA0002
BA0003
BA0006
BA0010
BA0012
BA0018
–
–
for drive models CIMR-VBA0006F to BA0018F, 2A0010F to 2A0069F, and 4A0001F to
V1000
Figure 9 Remove the UL Type 1 Terminal Cover
(CIMR-VBA0001F to BA0003F, 2A0001F to 2A0006F)
Figure 10 Remove the Terminal Cover on an IP20/UL Type 1 Drive
Drive Model
CIMR-V
Three-Phase
200 V Class
2A0001
2A0002
2A0004
2A0006
2A0010
2A0012
2A0020
2A0030
2A0040
2A0056
2A0069
17. on page 21.
Figure 9 for details.
YASKAWA ELECTRIC SIEP C730600 70B V1000 Option SI-EP3/V Technical Manual
Three-Phase
400 V Class
–
4A0001
4A0002
4A0004
4A0005
4A0007
4A0009
4A0011
4A0018
4A0023
4A0031
4A0038