YASKAWA PROFINET V1000 Technical Manual page 19

11.
For IP66/UL Type 4X enclosure models, remove the lower terminal cover from the drive, if provided. Apply
pressure using fingers on the left and right tabs. Lift and pull the cover forward to release (see
Note: The lower terminal cover is required for secure mounting of the option on certain models. Use
cover part number by model. Contact your Yaskawa representative for ordering, if this part is not available in your drive.
Table 8 IP66/UL Type 4X Lower Terminal Cover Part Number by Model
Drive Model CIMR-V
2A0001 to 2A0008, 2A0018, 2A0030 to 2A0069
Figure 14
12.
For IP66/UL Type 4X enclosure models, remove the option cover.
Figure 15
YASKAWA ELECTRIC SIEP C730600 70B V1000 Option SI-EP3/V Technical Manual
BA0006, BA0010
2A0010, 2A0012
4A0001 to 4A0009
BA0012
2A0020
4A0011
BA0001 to BA0003
4A0018 to 4A0038
Figure 14 Remove IP66/UL Type 4X Lower Terminal Cover
Mounting Tab
Figure 15 Remove the Option Cover
Mounting
Slot
Mounting Tab
Mounting
Slot
Option Cover
5 Installation Procedure
Figure
Table 8 to find the lower terminal
Terminal Cover Part Number
CVST31300
CVST31301
–
V1000
V1000
14).
19