YASKAWA PROFINET V1000 Technical Manual page 24

5 Installation Procedure
27.
For IP66/UL Type 4X enclosure models, attach the option to the drive by aligning the two mounting tabs on left
and right side of the option with slots on the drive. Plug-in the CN5 connector on the back of the option into the
CN5 connector on the drive. Tighten the screw in the front of the option (see
Figure 28
28.
For IP66/UL Type 4X enclosure models, insert the LED operator cable from the front cover into connector CN1
on the drive (see
Figure 29
24
CN5 Connector
port on drive
Figure 28 Attach Option to IP66/UL Type 4X
Figure 29).
CN1 connector
Figure 29 Insert LED Operator Cable
(underside of option)
Mounting Tab
Insert LED
operator cable
Inside front cover
YASKAWA ELECTRIC SIEP C730600 70B V1000 Option SI-EP3/V Technical Manual
Figure 28).
V1000
CN5 Connector
V1000