Receiving - YASKAWA PROFINET V1000 Technical Manual

3 Receiving

3 Receiving
After receiving the option package:
1. Make sure that the option is not damaged and no parts are missing. Contact your sales outlet if the option or other parts
appear damaged.
NOTICE: Do not use damaged parts to connect the drive and the option. Failure to comply could damage the drive and option.
2. Confirm that the model number on the option nameplate and the model listed in the purchase order are the same. Refer
to on page for details. Contact the distributor where the option was purchased or the Yaskawa sales office
immediately about any problems with the option.

Option Package Contents
Description:
_
Quantity:

Installation Tools
A Phillips screwdriver (M3, M3.5 to M6 metric or #1, #2 U.S. standard
<1> Screw sizes vary by drive capacity. Select a screwdriver that matches the drive capacity.
8
Table 2 Option Package Contents
Option Unit
1
Ground Wire Warning Labels
4
) is required to install the option.
<1>
YASKAWA ELECTRIC SIEP C730600 70B V1000 Option SI-EP3/V Technical Manual
Installation Manual
MANUAL
1 1