The main logic board and processor module each contain memory where specific
information and System ID information is stored. The main logic board also stores
the server's System Asset number (see Figure 4-1).
Information is available for the server's main logic board and processor module (such
as part numbers, revisions, serial numbers, etc.). You can also assign Asset
numbers to these components. In addition, the software can detect when changing
the server configuration by adding or removing either component.
You can obtain information about the server's configuration by running the SCU or by
using ServerWORKS management software.
Processor Module
Figure 4-1. DIGITAL Server Component Information
Asset#
Part#
Revision#
Serial#
Artwork#
System ID
DIGITAL
3100R/3200R
Server (System ID)
Asset#
Part#
Revision#
Serial#
Artwork#
System ID
System Asset#
Main Logic Board
DEC01031
Troubleshooting
4-7