Set Up Wireless Lan On Cisco Unified Communications Manager - Cisco 9971 Administration Manual

Set Up Wireless LAN
• Wireless network configuration in Cisco Unified Communications Manager Administration
• Wireless network configuration on the Cisco Unified IP Phone 9971
Procedure
Step 1
To enable the application, go to Applications > Administrator Settings > Network Setup > Wireless Setup
> Wireless Sign in Access.
Step 2 Enable Wireless network.
Step 3 To change the username or password, go to Applications > Administrator Settings.

Set Up Wireless LAN on Cisco Unified Communications Manager

In Cisco Unified Communications Manager Administration, you must enable a parameter called "Wi-Fi" for
the wireless Cisco Unified IP Phone 9971.
In the Phone Configuration window in Cisco Unified Communications Manager Administration (Device
Note
> Phone), use the wired-line MAC address when you configure the MAC address. Cisco Unified
Communications Manager registration does not use the wireless MAC address.
Perform the following procedure in Cisco Unified Communications Manager Administration.
Procedure
Step 1
To enable the wireless LAN on a specific phone perform the following steps:
a) Select Device > Phone.
b) Locate the required phone.
c) Select the enable setting for the Wi-Fi parameter in the Product Specific Configuration Layout section
d) Check the Override Common Settings check box
Step 2 To enable wireless LAN for a group of phones,
a) Select Device > Device Settings > Common Phone Profile.
b) Select the enable setting for the Wi-Fi parameter
c) Check the Override Common Settings check box
d) Associate the phones with that common phone profile using Device > Phone .
Step 3 To enable wireless LAN for all WLAN-capable phones in your network,
a) Select System > Enterprise Phone Configuration.
b) Select the enable setting for the Wi-Fi parameter.
c) Check the Override Common Settings check box.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0
66