Cisco Unified Ip Phone 8961, 9951, And 9971 Administration Guide For Cisco Unified Communications Manager - Cisco 9971 Administration Manual

Telephony Features
Feature
Line Select
Line Select for Voice Messages
Line State Display Enhancement
Line Status for Call Lists
Line Text Label
Log Out Of Hunt Groups

Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager

10.0
196
Description
If this feature is disabled (default), the ringing line is selected. When the feature is enabled,
the primary line is picked up even if a call is ringing on another line. The user must manually
select the other line.
See "Always use prime line" in the following chapters of the Cisco Unified Communications
Manager Administration Guide:
• "Device Profile Configuration"
• "Common Phone Profile Configuration"
• "Cisco Unified IP Phone Services Configuration"
When disabled (default), pressing the Messages button selects the line that has a voice message.
If more than one line has voice mail, the first available line is selected. When the features is
enabled, the primary line is always used to retrieve voice messages.
See "Always use prime line for voice message" in the following chapters of the Cisco Unified
Communications Manager Administration Guide:
• "Device Profile Configuration"
• "Common Phone Profile Configuration"
• "Cisco Unified IP Phone Services Configuration"
Enables users to see if a Cisco Unified IP Phone is in the Remote-in-use state when there is a
call alert on shared lines.
For more information, see Cisco Unified Communications Manager Administration Guide.
Allows the user to see the Line Status availability status of monitored line numbers in the Call
History list.
See Enable BLF for Call Lists, on page
Sets a text label for a phone line instead of the directory number.
See Set the Label for a Line, on page
Allows users to sign out of a hunt group and temporarily block calls from ringing their phone
when they are not available to take calls. Logging out of hunt groups does not prevent non-hunt
group calls from ringing their phone.
See:
• Configure Phone Services for Users, on page 86
• Cisco Unified Communications Manager System Guide, "Understanding Route Plans"
chapter
223.
247.