Set Up Remote Port Configuration - Cisco 9971 Administration Manual

Set Up Remote Port Configuration

Step 5 Check the Override Common Settings check box for any setting in the Product Specific Configuration area
that you wish to update.
• If you do not check this check box, the corresponding parameter setting does not take effect.
• Parameters that you set in the Product Specific Configuration area may also appear in the Phone
If you set these same parameters in these other windows too, the setting that takes precedence is determined
in the following order:
1 Device Configuration window settings (highest precedence)
2 Common Phone Profile window settings
3 Enterprise Phone Configuration window settings (lowest precedence)
Step 6 Select Save.
Set Up Remote Port Configuration
To configure the Switch Remote Port Configuration parameter or the PC Remote Port Configuration parameter,
you can configure individual phones or multiple phones.
Procedure
Step 1 To configure the parameter for individual phones, perform the following steps:
a) In Cisco Unified Communications Manager Administration, choose Device > Phone.
b) Select the appropriate IP phones.
c) Scroll to the Product Specific Configuration Layout area (Switch Port Remote Configuration or PC Port
Remote Configuration) and set the parameter.
d) Select Save.
Step 2 To configure the setting on multiple phones simultaneously, perform the following steps:
a) In Cisco Unified Communications Manager Administration, choose System > Enterprise Phone
Configuration.
b) Configure the Remote Port Configuration parameter.
c) Select Save.
Set Headset Sidetone Control
When users handle calls using headsets, they may find that they are hearing feedback as they speak. This
additional audio is called sidetone. If there is too much sidetone, users can hear what they are saying in the
earpiece of the headset and find this sidetone distracting. The amount of sidetone varies from headset to
headset.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0
226
Configuration window for various devices and in the Enterprise Phone Configuration window.