Phone Button Templates - Cisco 9971 Administration Manual

Phone Button Templates

When the default line filter is configured, a filter named Daily schedule is available to users under the Call
notifications options in the Settings > Preferences menu of the phone. This daily schedule filter is in addition
to the preset All Calls filter.
If the default line filter is not configured, the phone checks all provisioned lines. If configured, the phone
checks the lines set on Cisco Unified Communications Manager if the user selects Default filter as the active
filter, or if there are no custom filters.
Procedure
Step 1 In Cisco Unified Communications Manager Administration, choose Device > Phone.
Step 2
Set the Default line filter field.
A comma-separated list of phone device names to be included in the default filter.
By default, the list is blank, and all provisioned lines are checked.
Phone Button Templates
Phone button templates let you assign speed dials and call-handling features to programmable buttons.
Call-handling features that can be assigned to buttons include Answer, Mobility, and All Calls.
Ideally, you modify templates before you register phones on the network. In this way, you can access customized
phone button template options from Cisco Unified Communications Manager during registration.
Modify Phone Button Template
For more information about IP Phone services and configuring line buttons, see the documentation for your
particular Cisco Unified Communications Manager release.
Procedure
Step 1 From Cisco Unified Communications Manager Administration, choose Device > Device Settings > Phone
Button Template.
Step 2 Click Find.
Step 3 Select the phone model.
Step 4 Select Copy, enter a name for the new template, and then select Save.
The Phone Button Template Configuration window opens.
Step 5 Identify the button that you would like to assign, and select Service URL from the Features drop-down list
that associates with the line.
Step 6
Select Save to create a new phone button template that uses the service URL.
Step 7 Choose Device > Phone and open the Phone Configuration window for the phone.
Step 8 Select the new phone button template from the Phone Button Template drop-down list.
Step 9 Select Save to store the change and then select Apply Config to implement the change.
The phone user can now access the Self Care Portal and associate the service with a button on the phone.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0
234