Cisco Unified Ip Phone 8961, 9951, And 9971 Administration Guide For Cisco Unified Communications Manager - Cisco 9971 Administration Manual

Unified ip phone 8961, 9951, and 9971 administration guide for cisco unified communications manager 10.0
Hide thumbs Also See for 9971:
Table of Contents

Advertisement

Table 11: Ethernet Setup Menu Options
Option
IPv4 Setup
IPv6 Setup
MAC Address
Domain Name
Operational VLAN ID
Admin. VLAN ID
PC VLAN

Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0

Description
In the IPv4 Setup configuration
submenu, you can do the following:
• Enable or disable the phone to
use the IP address that the
DHCP server assigns.
• Manually set the IP Address,
Subnet Mask, Default Routers,
DNS Server, and Alternate
TFTP servers.
The IPv6 configuration for the phone.
Unique Media Access Control
(MAC) address of the phone.
Name of the Domain Name System
(DNS) domain in which the phone
resides.
Auxiliary Virtual Local Area
Network (VLAN) configured on a
Cisco Catalyst switch of which the
phone is a member.
If the phone has not received an
auxiliary VLAN, this option indicates
the Administrative VLAN.
If neither the auxiliary VLAN nor the
Administrative VLAN are
configured, this option is blank.
Auxiliary VLAN of which the phone
is a member.
Used only if the phone does not
receive an auxiliary VLAN from the
switch; otherwise, this value is
ignored.
Allows the phone to interoperate with
third-party switches that do not
support a voice VLAN. The Admin
VLAN ID option must be set before
you can change this option.
Configure Network Settings
To Change
Scroll to IPv4 Setup and press
Select.
See
Set Up IPv4, on page
73.
Scroll to IPv6 Setup and press
Select.
See
Set Up IPv6, on page
76.
Display only. Cannot configure.
See
Set Domain Name Field, on
page
79.
Display only. Cannot configure.
The phone obtains the Operational
VLAN ID via Cisco Discovery
Protocol (CDP) or Link Level
Discovery Protocol Media Endpoint
Discovery (LLDP-MED). This
information comes from the switch
to which the phone is attached. To
assign a VLAN ID manually, use
the Admin VLAN ID option.
See
Set Admin VLAN ID Field, on
page
79.
See
Set PC VLAN Field, on page
79.
71

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

99518961

Table of Contents