Cisco Unified Ip Phone 8961, 9951, And 9971 Administration Guide For Cisco Unified Communications Manager - Cisco 9971 Administration Manual

Procedure
Step 1
Press Applications
Step 2 To access the Network Settings menu, select Administrator Settings > Network Settings
Related Topics
Network Protocols, on page 9
Status Messages Fields, on page 265
Set Up IPv4
The following table describes the IPv4 Setup menu options.
Table 12: IPv4 Setup Menu Options
Option
DHCP Enabled
IP Address
Subnet Mask
Default Router
DNS Server 1
DNS Server 2
DNS Server 3

Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0

.
Description
Indicates whether the phone has DHCP enabled or
disabled.
When DHCP is enabled, the DHCP server assigns
the phone an IP address. When DHCP is disabled,
the administrator must manually assign an IP
address to the phone.
For more information, see Set Up Phone To Use
DHCP, on page 84 and Set Up Phone To Not Use
DHCP, on page 85.
Internet Protocol (IP) address of the phone.
If you assign an IP address with this option, you
must also assign a subnet mask and default router.
See the Subnet Mask and Default Router options
in this table.
Subnet mask used by the phone.
Default router used by the phone.
Primary Domain Name System (DNS) server (DNS
Server 1) and optional backup DNS servers (DNS
Server 2 and 3) that the phone uses.
Configure Network Settings
To change
See Set DHCP Enabled Field,
on page 82.
See Set IP Address Field, on
page 82.
See Set Subnet Mask Field, on
page 83.
See Set Default Router Field,
on page 83.
See Set DNS Server Fields, on
page 83.
73