Cisco Nexus 7000 Series Command Reference Manual page 139

Cisco Nexus 7000 Series LISP Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
lig
To initiate a LISP Internet Groper (LIG) operation for a destination endpoint identifier (EID) or to test
the router's local EID prefix, use the lig command.
Syntax Description
hostname
destination-EID
count count
source source-EID
to map-resolver
self
self6
version
None
Defaults
Any command mode
Command Modes
network-admin
Supported User Roles
vdc-admin
Command History Release
5.0(1.13)
This command initiates a LIG query for the indicated destination hostname or EID, or the routers local
Usage Guidelines
EID-prefix. Use the lig command to test whether a destination EID exists in the LISP mapping database
system, or see if your site is registered with the mapping database system.
When a LIG query is initiated with a hostname or destination EID, the router sends a Map-Request to
the configured Map-Resolver for the indicated destination hostname or EID. When a Map-Reply is
returned, its contents are displayed to the user and entered in the LISP map-cache.
When a LIG self query is initiated, the router's local EID-prefix is substituted in place of the destination
EID when the router sends a Map-Request to the configured Map-Resolver.
The following operational attributes apply to LIG:
OL-25345-01
lig {hostname | destination-EID} [count count] [source source-EID] [to map-resolver]
lig {self | self6 | version} [count count] [source source-EID] [to map-resolver]
Destination hostname.
Destination IPv4 or IPv6 EID.
(Optional) Specifies to send this number of Map-Requests. The range is from 1
to 5.
(Optional) Specifies to send the Map-Request using this IPv4 or IPv6 source
EID.
(Optional) Specifies to sendthe Map-Request to this map-resolver locator instead
of the configured Map-Resolver.
Tests to see if the local IPv4 EID-prefix is registered in the mapping database.
Test to see if the local IPv6 EID-prefix is registered in the mapping database.
Displays the version of LIG that the system is supporting.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS LISP Command Reference
lig
LSP-129