Cisco Nexus 7000 Series Command Reference Manual page 176

show ip lisp map-cache
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
129.250.26.242
---<skip>---
switch#
This example shows how to display a specific IPv4 EID-prefix information that is associated with that
IPv4 EID prefix entry:
switch# show ip lisp map-cache 153.16.11.0/24
LISP IP Mapping Cache for VRF "default", 4 entries
153.16.11.0/24, uptime: 04:43:21, expires: 19:16:38, via map-reply, auth
State: complete, last modified: 04:43:21, map-source: 67.169.7.150
Locator
67.169.7.150
switch#
Related Commands Command
show ip lisp
Cisco Nexus 7000 Series NX-OS LISP Command Reference
LSP-166
04:41:40
Uptime State
04:43:21 up
Last up/down state change:
Last data packet in/out:
Last control packet in/out:
Last priority/weight change:
Description
Displays the IPv4 LISP configuration status for the local device.
up 1/100
Priority/ Data
Weight in/out
1/100 2214/2213
04:43:21, state change count: 0
00:00:14/00:00:14
00:45:23/00:45:23
never/never
Cisco Nexus 7000 Series LISP Commands
1139/1138 1/0
Control
in/out
3/2