Clear Ipv6 Lisp Map-Cache Lsp-11 - Cisco Nexus 7000 Series Command Reference Manual

Cisco Nexus 7000 Series LISP Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
clear ipv6 lisp map-cache
To clear the Locator/ID Separation Protocol (LISP) IPv6 map-cache, use the clear ipv6 lisp map-cache
command.
Syntax Description vrf vrf-name
EID
None
Defaults
Any command mode
Command Modes
network-admin
Supported User Roles
vdc-admin
Command History Release
5.0(1.13)
The clear ipv6 lisp map-cache command removes all IPv6 dynamic endpoint identifier to Routing
Usage Guidelines
Locator (EID-to-RLOC) map-cache entries in the map cache. When the optional EID-prefix is specified,
only the EID-to-RLOC mapping for that entry is cleared. Otherwise, the entire data cache is cleared.
When you specify the optional vrf keyword, the data cache is cleared for the specified VRF
This command does not require a license.
This example shows how to clear the LISP IPv6 map-cache:
Examples
switch# clear ipv6 lisp map-cache
switch# show ipv6 lisp map-cache
LISP IPv6 Mapping Cache for VRF "default", 0 entries
This example shows how to display all LISP map-cache entries, and then clears the LISP map-cache for
an IPv4 EID-prefix:
switch# show ipv6 lisp map-cache
LISP IP Mapping Cache for VRF "default", 2 entries
153.16.1.0/24, uptime: 00:00:06, expires: 23:59:53, via map-reply, auth
Locator
129.250.1.255
129.250.26.242
OL-25345-01
clear ipv6 lisp map-cache [vrf vrf-name] [EID]
(Optional) Specifies virtual routing and forwarding (VRF) with which to clear
the map cache.
(Optional) IPv6 EID-prefix to clear from LISP map cache.
Modification
This command was introduced.
Uptime
00:00:06
00:00:06
State Priority/
Weight
up 254/0
up 1/100
Cisco Nexus 7000 Series NX-OS LISP Command Reference
clear ipv6 lisp map-cache
Data Control
in/out in/out
0/0 0/0
0/0 0/0
LSP-11