Map-Server - Cisco Nexus 7000 Series Command Reference Manual

map-server

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
map-server
To configure the Map-Server to which the dynamic-endpoint identifier (EID) registers to when this
policy is invoked, use the map-server command. To remove the configured reference to the Map-Server,
use the no form of this command.
Syntax Description locator
key key-type
password
proxy-reply
By default, no Map-Server is configured within a dynamic-EID policy and the configured map-server
Defaults
on the LISP-VM router (from the {ip|ipv6} lisp etr map-server command) is used to register the
dynamic-EID.
Dynamic-EID configuration mode
Command Modes
network-admin
Supported User Roles
vdc-admin
Command History Release
5.0(1.13)
In LISP VM-Mobility, when a dynamic-EID roams to the LISP-VM router, you must register the
Usage Guidelines
dynamic-EID to a Map-Server with its new attributes (the 3-tuple of (locator, priority, weight) according
to the database-mapping dynamic-EID subcommand). The map-server dynamic-EID subcommand
configures the Map-Server to which the dynamic-EID registers. The locator specified in the map-server
command can be either an IPv4 or IPv6 address in the locator space.
Cisco Nexus 7000 Series NX-OS LISP Command Reference
LSP-148
map-server locator key key-type password
no map-server locator key key-type password
map-server locator proxy-reply
no map-server locator proxy-reply
IPv4 or IPv6 Routing Locator (RLOC) allowed within the Map-Registration
message.
Specifies the key type that the following SHA-1 password is using. Type (0)
indicates that a cleartext password follows, Type (3) indicates that a 3DES
encrypted key follows, and Type (7) indicates that a Cisco Type 7 encrypted
password follows.
Password used to create the SHA-1 HMAC hash when authenticating the
Map-Register message sent by the ETR.
Specifies that the Map Register sent to the Map Server requests that the
Map-Server proxy map reply on behalf of dynamic-EIDs included in this policy.
Modification
This command was introduced.
Cisco Nexus 7000 Series LISP Commands