Ipv6 Lisp Locator-Vrf - Cisco Nexus 7000 Series Command Reference Manual

Cisco Nexus 7000 Series LISP Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .

ipv6 lisp locator-vrf

To configure a nondefault virtual routing and forwarding (VRF) table to be referenced by any IPv6
locator addresses, use the ipv6 lisp locator-vrf command. To return to using the default routing table
for locator address references, use the no form of this command.
Syntax Description
vrf-name
IPv6 locator addresses are associated with the default (global) routing table.
Defaults
VRF configuration
Command Modes
network-admin
Supported User Roles
vdc-admin
Command History Release
5.0(3.lisp)
When you configure Locator/ID Separation Protocol (LISP) in a nondefault VRF to keep EID-prefixes
Usage Guidelines
in one VRF separate from EID-prefixes in another VRF, and both EID VRFs share the same
locator-based core network and same mapping database system infrastructure, these locator addresses
must be reachable from the default VRF or a specified common VRF. Use the ipv6 lisp locator-vrf
command to specify the VRF to be associated with these locator addresses.
When you enter the ipv6 lisp locator-vrf command, the locator addresses in any subsequent LISP
commands are referenced to the specified VRF. For example, the locator addresses in the ipv6 lisp itr
map-resolver and ipv6 lisp etr map-server commands refer to the VRF that you configured when you
entered the ip lisp locator-vrf command. The map-servers and map-resolvers can also share the
configuration from the locator-VRF.
When you configure mixed address families (for example, IPv4 EIDs and IPv6 locators or IPv6 EIDs
Note
and IPv4 locators), use the ipv6 lisp locator-vrf command.
This command does not require a license.
OL-25345-01
ipv6 lisp locator-vrf vrf-name
no ipv6 lisp locator-vrf vrf-name
Name of the VRF instance to be referenced by IPv6 locator addresses instead of
the default table.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS LISP Command Reference
ipv6 lisp locator-vrf
LSP-103