Show Ip Lisp Translation-Cache - Cisco Nexus 7000 Series Command Reference Manual

Cisco Nexus 7000 Series LISP Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .

show ip lisp translation-cache

To display the Locator/ID Separation Protocol (LISP) IPv4 address translation cache and statistics
associated with each entry, use the show ip lisp translation-cache command.
Syntax Description non-routable-EID
None
Defaults
Any command mode
Command Modes
network-admin
Supported User Roles
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(1.13)
The show ip lisp translation-cache command is applicable only when the ip lisp translate command
Usage Guidelines
is used to configure LISP translation.
When you use the non-routable-EID argument, only the statistics associated with that single translation
are displayed.
This command does not require a license.
This example shows how to display the LISP IPv4 address translation cache and statistics associated
Examples
with each entry:
switch# show ip lisp translate-cache
LISP EID Translation Cache for VRF "default" - 1 entries
Inside: 10.1.1.1 outside: 172.16.1.1, ingress/egress count: 0/0
Last ingress packet: never, last egress packet: never
switch#
Related Commands Command
show ip lisp
OL-25345-01
show ip lisp translation-cache [non-routable-EID]
(Optional) IPv4 address of the inside nonroutable EID.
Modification
This command was introduced.
Description
Displays the IPv4 LISP configuration status for the local device.
Cisco Nexus 7000 Series NX-OS LISP Command Reference
show ip lisp translation-cache
LSP-169