Cisco Nexus 7000 Series Command Reference Manual page 72

ip lisp map-server
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
•
This command does not require a license.
This example shows how to configure the IPv4 LISP Map-Server functionality on the Cisco NX-OS
Examples
device:
switch# configure terminal
switch(config)# ip lisp map-server
Related Commands Command
ip lisp alt-vrf
Cisco Nexus 7000 Series NX-OS LISP Command Reference
LSP-62
When a Map-Resolver supports a LISP deployment that is configured for virtualization, you must
concurrently configure the Map-Resolver with a Map-Server and see registrations from all ETRs in
the LISP network to properly resolve Map-Requests when instance IDs are used. A Map-Resolver
cannot forward a Map-Request with an instance ID over the LISP ALT, as would be the case in a
nonvirtualized configuration. The Map-Resolver can only query EID-tables that are maintained by
the concurrent Map-Server for EID-to-RLOC mapping resolution in a virtualized LISP deployment.
Description
Configures which VRF that LISP should use when sending Map Requests
for an IPv4 EID-to-RLOC mapping directly over the ALT.
Cisco Nexus 7000 Series LISP Commands