Cisco Nexus 7000 Series Command Reference Manual page 181

Cisco Nexus 7000 Series LISP Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
Locator Reachability Algorithms:
Echo-nonce algorithm:
TCP-counts algorithm:
RLOC-probe algorithm:
Static mappings configured:
Map-cache limit:
Map-cache size:
ETR Database, global LSBs: 0x00000001:
EID-prefix: 2001:db8:1203::/48, LSBs: 0x00000001
switch#
Table 2
Field
Ingress Tunnel Router
(ITR)
Egress Tunnel Router
(ETR)
Proxy-ITR
Proxy-ETR)
Last-resort source
locator
LISP-NAT
Interworking
ITR send Map-Request
ITR send Data-Probe
LISP-ALT vrf
ITR Map-Resolver
ETR Map-Server(s)
Last Map-Register sent
to MS
ETR glean mapping
ETR accept mapping
data
ETR map-cache TTL
OL-25345-01
Locator: 172.22.156.23, priority: 1, weight: 100
Uptime: 09:27:51, state: up, local
describes the significant fields shown in the display.
Table 2
Description
Whether the router is configured as an ITR. For more information, see the
ipv6 lisp itr command.
Whether the router is configured as an ETR. For more information, see the
ipv6 lisp etr command.
Whether the router is configured as a PITR. For more information, see the
ipv6 lisp proxy-itr command.
Whether the router is configured as a PETR. For more information, see the
ipv6 lisp proxy-etr command.
Last-resort source locator for LISP messages.
Whether the router is configured for LISP NAT. For more information, see
the ipv6 lisp translate command.
Whether sending Map Requests is enabled. For more information, see the
ipv6 lisp itr map-resolver command.
Whether ipv6 lisp itr send-data-probe is enabled.
Whether a LISP-ALT VRF is configured and the VRF name. For more
information, see the ipv6 lisp alt-vrf command.
Configured ITR Map Resolver. For more information, see the ipv6 lisp itr
map-resolver command.
Configured ETR Map Server. For more information, see the ipv6 lisp etr
map-server command.
When this device last sent a Map-Registration message to the configured
Map-Server.
Whether the ETR is configured to glean mapping data contained in a
encapsulated packet. For more information, see the ipv6 lisp etr
glean-mapping command.
Whether the ETR is configured to cache the mapping data contained in a
Map Request. For more information, see the ipv6 lisp etr
accept-map-request-mapping command.
Current ETR map-cache TTL. For more information, see the ipv6 lisp etr
map-cache-ttl command.
disabled
disabled
disabled
0
1000
3
show ip6 lisp Field Descriptors
Cisco Nexus 7000 Series NX-OS LISP Command Reference
show ipv6 lisp
LSP-171