Description - Cisco Nexus 7000 Series Command Reference Manual

description

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
description
To add a description to a Locator/ID Separation Protocol (LISP) site configuration, use the description
command. To remove the reference to a LISP site, use the no form of this command.
Syntax Description
description
None
Defaults
LISP site configuration mode
Command Modes
network-admin
Supported User Roles
vdc-admin
Command History Release
5.0(1.13)
On the Map Server, when you enter the lisp site command, you are placed in the site sub-command
Usage Guidelines
mode. In this mode, you can add a description with the referenced LISP site by using the description
command. This description displays when you enter the show lisp site command.
This command does not require a license.
This example shows how to configure the LISP site named Customer-1, enter the site command mode,
Examples
and add the description string for Customer-1:
switch# configuration terminal
switch(config)# lisp site Customer-1
switch(config-lisp-site)# description Customer-1 Site Information
Related Commands Command
lisp site
show lisp site
Cisco Nexus 7000 Series NX-OS LISP Command Reference
LSP-20
no lisp site description
no lisp site description
Description listed with the associated LISP site.
Modification
This command was introduced.
Description
Configures a LISP site and enters site configuration mode on a Map Server.
Displays registered LISP sites on a Map Server.
Cisco Nexus 7000 Series LISP Commands