Show Ipv6 Lisp Locator-Hash - Cisco Nexus 7000 Series Command Reference Manual

show ipv6 lisp locator-hash

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
show ipv6 lisp locator-hash
To display source and destination locators that are used for a given IPv6 source and destination endpoint
identifier (EID) pair, use the show ip lisp locator-hash command.
Syntax Description source-EID
dest-EID
dest-EID-prefix
vrf vrf-name
None
Defaults
Any command mode
Command Modes
network-admin
Supported User Roles
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(1.13)
Use the show ipv6 lisp locator-hash command to display the source and destination locators that are
Usage Guidelines
used for a given IPv4 source and destination EID pair as the result of the locator hashing process. The
source locator is chosen based on the source EID from the EID-prefix database that you configured by
using the ipv6 lisp etr database-mapping command. The destination locator is selected by finding the
destination EID in the EID-to-RLOC map cache.
When you use the dest-EID-prefix argument, the locator hash array appears, indicating which locator is
used for each of 25 different flow hash buckets.
When you use the vrf keyword, IPv4 EIDs are resolved within the specified VRF in order to display the
locator-hash.
This command does not require a license.
Cisco Nexus 7000 Series NX-OS LISP Command Reference
LSP-176
show ipv6 lisp locator-hash {source-EID dest-EID} | dest-EID-prefix} [vrf vrf-name]
IPv6 source EID.
IPv6 destination EID.
IPv6 destination EID-prefix.
(Optional) Specifies the virtual routing and forwarding (VRF) with which to
resolve EIDs.
Modification
This command was introduced.
Cisco Nexus 7000 Series LISP Commands